iNOVA PHARMACEUTICALS PTY LTD (3M AUSTRALIA)

iNova Pharmaceuticals (Australia) Pty Ltd, previously known as 3M Pharmaceuticals. develops and markets a range of over-the-counter and prescription medicines to Australasia, Asia-Pacific, South Africa and other international markets directly and also through other pharmaceutical companies and agents.

• GMP UPGRADE TO GRANULATION SUITE, SYDNEY, NSW, AUSTRALIA
• REFURBISHMENT OF HEAD OFFICE, PYMBLE, NSW, AUSTRALIA
• ST MARYS SITE DEVELOPMENT – STAGE 1, ST MARYS, NSW, AUSTRALIA
• NEW LABORATORY BUILDING
• THORNLEIGH SITE DEVELOPMENT

Client: 3M (iNova Pharmaceutical Pty Ltd)

Location: NSW, Australia

ALLERGAN AUSTRALIA PTY LTD

ALPHA LABORATORIES (NZ) LTD

A Master Plan has been developed including site layout and building layouts for a new pharmaceutical facility on this site. These production facilities would be designed to be compliant to the manufacturing standards set out by international authorities like EU, PIC/S and UK MHRA.

The new manufacturing facilities would meet the future production demands for Aristopharma, including Beta Lactams & non-Beta Lactams, Solids and Liquids , Steriles, Hormones & Steroids, Anti HIV, Oncology, Metered Dose Inhalers, Large Volume Parenterals etc, with all necessary production, storage and warehouse needs, as well as catering for administration, quality assurance and control, research and development, engineering, site services and staff amenities.

Location: Bangladesh

Client: Banner Pharmacaps

Location: Bangalore, India

Huntingwood Site Development

The project was driven by the need to consolidate Beiersdorf Australia Ltd's existing Tesa and Medical operations onto a common site within a specific timeframe.

This involved the development of 6ha greenfield site for a new manufacturing, warehousing and distribution facility. Planning and layout of the site was a crucial factor in achieving optimal usage of the land with allowance being made for future stages of development.

The Medical operation in particular required a carefully designed clean room facility to comply with the Code of Good Manufacturing Practice (cGMP).

Client: Beiersdorf Australia Ltd

Location: Sydney, NSW, Australia

Energy & Services Audit & Technology Park Design, Dhaka, Bangladesh

Audit and review of current and future services and energy demand for an existing pharmaceutical complex which is being expanded into a Technology Park.

Results used as basis for the design of the Technology Park services reticulation system.

Construction Management Services

Construction management of factories in complex on the outskirts of Dhaka to produce solid dose pharmaceuticals and antibiotics for domestic and international sales.

Client: Beximco Pharmaceuticals Limited

Location: Dhaka, Bangladesh

For Surgical and Respiratory-Therapy Health-Care Products

• Project management, construction management and design documentation of Building works and Controlled Environmental HVAC services for a new administration office and sterile suite used for sterilization of instruments and equipment for surgery/hospital.

Client: Cardinal Health Australia

Location: Australia

PORTABLE LABORATORIES, WAREHOUSING AND MANUFACTURING FACILITY

• Engineering support.
• Manufacturing support for new production and packaging lines.
• Technical support for Australian TGA certification.

Client: Cat Media Pty ltd

Location: Australia

PRODUCTION CLEAN ROOM

• Project management, construction management and design documentation of Building works and Controlled Environmental HVAC services and sterile suite used for the assembly of the components

 

Client: Cochlear Ltd

Location: Australia

D.F.C PHARMAMED PTY LTD

• Design of HVAC System to comply with cGMP requirements of TGA Australia.

 

Client: D.F.C Pharmamed Pty Ltd

Location: Australia

 

Ferron, a daughter company of Dexa Medica, is a new upcoming pharmaceutical manufacturer of therapeutic drugs and has put their mark in the Indonesian Pharmaceuticals Industry. Ferron has proven to be the frontier of GMP and continues to innovate.

• STERILE FACILITY
• Preparation of initial layout of Sterile Facility
• SOLIDS, LIQUIDS AND STERILES MANUFACTURING FACILITIES
• Technical Review of the complete production cleanroom and services.
• NON-BETALACTAM SOLIDS MANUFACTURING FACILITIES
• Provision of training for GMP, Quality Controls and Validation.
• Mock-up Audit and Technical Supports in Australian TGA Certification of the new facilities.

Client: Ferron Par Pharmaceuticals P.T

Location: Indonesia

MASTER PLANNING PROJECTS

A Master Plan has been developed including site layout and building layouts for a new pharmaceutical facility on this site. These production facilities would be designed to meet manufacturing standards set out by international authorities, EU (PIC/S) and MHRA UK.

The new manufacturing facilities would meet the future production demands for General Pharmaceuticals, including Beta Lactams & non-Beta Lactams, Solids and Liquids , Opthalmic/Steriles, Hormones, Oncology, MDI etc, with all necessary production, storage and warehouse needs, as well as catering for administration, quality assurance and control, research and development, engineering, site services and staff amenities.

Client: General Pharma Ltd.

Location: North of Dhaka, Bangladesh

Glenmark Pharmaceuticals is a major Indian Pharmaceutical manufacturer of therapeutic drugs in the areas of dermatology, gynaecology, respiratory, gastrointestinals and to counter lifestyle diseases like diabetes and cardiology.

• TECHNICAL SUPPORT, TGA CERTIFICATION
• Technical support in application for Australian TGA certification of the new solid dosage clean manufacturing facility.
• Advice to local management on requirement to enable the company to comply with TGA.
• Review of Goa factory

Client: Glenmark Pharmaceuticals Ltd

Location: GOA, India

Novell is a major pharmaceutical manufacturer of therapeutic drugs in the areas of dermatology, respiratory, gastrointestinals, cardiovascular and hematopoietic system, genitor intestinal, neuro-muscular system, antibiotics, vitamins, minerals and anaesthetics.

• SOLIDS, LIQUIDS, STERILES AND VACCINES MANUFACTURING FACILITIES
• Comprehensive Technical Review of the complete production cleanroom and services designs.
• NON-BETALACTAM SOLIDS MANUFACTURING FACILITIES
• Provision of training for GMP, Quality Controls and Validation.
• Mock-up Audit and Technical Support in Australian TGA Certification of the new facilities.
• Novell has acquired TGA certification in 2007.

 

Client: Novell Pharmaceutical laboratories

Location: Indonesia

The new manufacturing facilities would meet the future production demands for Opsonin Pharma, including Beta Lactams & non-Beta Lactams, Solids and Liquids , Opthalmic/Steriles, Soft Gel Capsules, Hormones, Oncology, MDI, Biotech, Animal Health etc, with all necessary production, storage and warehouse needs, as well as catering for reception centre, administration, quality assurance and control, research and development, engineering, site services and staff amenities.

Client: Opsonin Pharma Ltd.

Location: Rupatoli, Bangladesh

 

Peptech manufacture sterile and non-sterile therapeutic goods for human use.

• FACILITY RELOCATION
• Project management, design services for manufacturing clean room facility and technical support services.
• Key Features:
• Budget and time constraints
• TGA licensing compliance
• Relocation of production

Client: Peptech Limited

Location: Australia

Peplin engaged the services of an independent company Nutratec to undertake the front-end processing of an API. To undertake this process Nutratec relocated to new premises and Peplin wished to ensure that the fit out satisfied GMP principles

• API PROCESSING FACILITY
• Architectural and engineering design services for the design of a new facility. Project management services during the construction phase.
  
• Key Features:
  • Storage and handling of large quantities of solvent (ethanol and heptane)
  • Ethanol extraction facility to be readily convertible to heptane extraction at a later date
  • Contaminated air does not impact the downstream extraction process.
  • TGA licensing compliance

Client: Peplin Limited

Location: Australia

Pfizer is a member of a major international health care, animal health care and consumer health care product manufacturer.

• BPCS IMPLEMENTATION
• Project management of the implementation of BPCS version 6.0.04 ERP software for the management of finished goods inventory, order entry, accounts payable, sales analysis and budgeting. The system interfaces to MAPS manufacturing and COMPUTRON financials.

Client: Pfizer Pty Ltd

Location: Sydney, NSW, Australia

Popular Pharmaceuticals is a new pharmaceutical manufacturer in Bangladesh, manufacturing and marketing a range of formulations covering all major therapeutic groups.

• NEW PHARMACEUTICAL MANUFACTURING FACILITIES
• Master Planning of the new pharmaceutical manufacturing facility to include Solid and Liquid, Penicillin, Cephalosporin, Sterile, Warehousing, Dispensing, Laboratories, Product Development, Utilities Services etc.
• Detailed HVAC system Design and Documentation for the new Facility including Preparation of Technical Performance Specification, Central Cooling Plant Design, Preparation of Bill of Quantities and Equipment Schedules for Tender Invitation.
• Tender Evaluation and Recommendation leading to the award of HVAC Contract (approx. US$2.80 million)
• Provision of Technical Support.

Client: Popular Pharmaceuticals Limited

Location: Bangladesh

Client: Rhône-Poulenc Rorer Bangladesh Ltd

Location: Tongi, Bangladesh

 

Rhône-Poulenc Rorer is a member of Aventis.

SITE MASTERPLAN

• Master Planning to extend and upgrade the solids, liquids and antibiotics manufacturing capability to their Wah Cantt manufacturing plant near Islamabad.
• Preparation of a comprehensive Cost Estimate Report on Capital and Operating Costs.
• Preparation of full Implementation Program.

Client: Rhône-Poulenc Rorer Pakistan Limited

Location: Wah Cantt., Pakistan

 

Client: Royal Perth Hospital

Location: Perth, Australia

Sandoz is a member of a major international manufacturer and developer of products in the areas of pharmaceuticals, generics, consumer health, eyecare products and medicines and animal health.

• NEW SOLIDS DOSAGE CLEAN MANUFACTURING FACILITIES
• Design of HVAC services for the clean manufacturing area and the warehouse extension in accordance with Novartis guidelines on controlled environmental parameters and monitoring and validation requirements.
• Technical support to the upgrading of new administration building, central cooling and heating plant.
• Technical support to the Testing and Commissioning of the HVAC systems.
• Project and Construction Management of civil, structural, electrical, piped services, HVAC, central energy plant upgrading and process equipment.

Client: Sandoz (Novartis)

Location: Tongi, Bangladesh

 

INVESTIGATION ON IMPROVEMENTS TO WATER TREATMENT PLANT

• Undertaking improvements to the water treatment plant at Schering-Plough’s Baulkham Hills pharmaceutical plant. These improvements related to methods of sanitizing the activated carbon filter in the treatment plant.

Client: Schering Plough Pty Ltd

Location: Australia

INVESTIGATION AND REPORT ON REGISTRATION AND LICENSING

• Investigation and report on the steps, times and costs involved in registration of Indonesian therapeutic products for sale in Australia and assisting in the certification of part of the Indonesian production facility by the Australian Therapeutic Goods Administration.

 

Client: PT Soho Industri Pharmasi

Location: Indonesia

 

• Analysis of alternative warehousing scenarios on the site to determine the most cost-effective solution for the storage and distribution of pharmaceutical OTC products to comply with the requirements of the Australian TGA.

Client: Soul Pattison Pty Ltd

Location: Sydney, NSW, Australia